Copure SPE (HLB family)
Biocomma Copure HLB: PS/DVB copolymer, pH 0–14, 500–750 m²/g, 200–400 Å, cartridges from 30 mg/1 mL to 500 mg/12 mL.
View product
Reference: GF1066F / GF615F
Violet Red Bile Glucose Agar (VRBGA)
Violet red bile glucose agar for Enterobacteriaceae counts and isolation of bile-tolerant Gram-negative bacteria, prepared by boiling without autoclaving.
Key specifications
- Product code, formulation A (dehydrated powder)
- GF1066F
- Product code, formulation A (granulated)
- KL1066F
- Product code, formulation B (dehydrated powder)
- GF615F
- Form
- Dehydrated powder; formulation A also granulated
- Configured to your application by our specialists
- Installed and commissioned on site
- Training and after-sales support across Jordan, the GCC and MENA
Violet Red Bile Glucose Agar (VRBGA)
Request a quoteOverview
Product overview
Violet Red Bile Glucose Agar (VRBGA) is a bile, glucose, neutral red and crystal violet medium. Formulation A (GF1066F powder, KL1066F granulated) is stated for identification of intestinal bacteria counts and Enterobacteriaceae and is prepared at 38.5 g per litre. Formulation B (GF615F) is stated for the isolation of bile-tolerant Gram-negative bacteria (CP/EP/USP) and is prepared at 41.5 g per litre, boiled for one minute.
Neither formulation is autoclaved, and both have a final pH of 7.4±0.2 and a 3-year sealed shelf life. Formulation B is stored at 2-25 °C; formulation A is stored dry and away from light with the cap tightened after use.
Specifications
Technical specifications
27 parameters
Product
- Product code, formulation A (dehydrated powder)
- GF1066F
- Product code, formulation A (granulated)
- KL1066F
- Product code, formulation B (dehydrated powder)
- GF615F
- Form
- Dehydrated powder; formulation A also granulated
- Pharmacopoeia reference (formulation B)
- CP / EP / USP
Preparation
- Preparation (formulation A)
- Suspend 38.5 g in 1 L of distilled or deionized water; heat with frequent agitation and boil to dissolve; dispense into flasks; no autoclaving needed.
- Preparation (formulation B)
- Suspend 41.5 g in 1 L of purified water; heat with frequent agitation and boil for 1 minute until dissolved; do not autoclave.
- Final pH (25 °C, both formulations)
- 7.4±0.2
Storage
- Storage (formulation A)
- Store in a dry place away from light; tighten the cap immediately after use.
- Storage (formulation B)
- Store in a dark and dry place at 2-25 °C; tighten the bottle cap immediately after use.
- Shelf life, sealed (all codes)
- 3 years
Composition (formulation A)
- Peptone
- 7 g/L
- Yeast powder
- 3 g/L
- Bile salt No.3
- 1.5 g/L
- Glucose
- 10 g/L
- Sodium chloride
- 5 g/L
- Neutral red
- 0.03 g/L
- Crystal violet
- 0.002 g/L
- Agar
- 12 g/L
Composition (formulation B)
- Yeast extract
- 3.0 g/L
- Pancreatic digest of gelatin
- 7.0 g/L
- Sodium deoxycholate
- 1.5 g/L
- Glucose
- 10 g/L
- Sodium chloride
- 5 g/L
- Neutral red
- 0.03 g/L
- Crystal violet
- 0.002 g/L
- Agar
- 15 g/L
Features
Key features
- 01
Enterobacteriaceae counting
Formulation A is stated for identification of intestinal bacteria counts and Enterobacteriaceae.
- 02
Bile-tolerant Gram-negatives
Formulation B is stated for isolation of bile-tolerant Gram-negative bacteria (CP/EP/USP).
- 03
No autoclaving
Both formulations are boiled to dissolve and are not autoclaved.
- 04
Granulated option
Formulation A is also available as granulated KL1066F.
From order to operation
We stay with the instrument after it arrives
Al-Shaker specifies the configuration, documents the system, and supports it across Jordan, the GCC, and MENA.
- 01
Consult
- 02
Plan
- 03
Supply
- 04
Install
- 05
Train
- 06
Support
Keep exploring
More from Biocomma
Copure QuEChERS
Biocomma Copure QuEChERS: EN 15662, AOAC 2007, and Original salts in 50 mL tubes — AOAC 6 g MgSO4 + 1.5 g NaOAc; EN 4 g MgSO4 + 1 g NaCl + citrates.
View product
CommaSil HPLC columns
Biocomma CommaSil fully porous silica HPLC: 3 / 3.5 / 5 μm particles, 2.1 / 3.0 / 4.6 mm IDs, lengths 30–250 mm.
View product
Syringe filters
Biocomma syringe filters: nylon, PTFE, PVDF, and PES membranes in a polypropylene housing, 0.22 μm versus 0.45 μm, optional gamma-sterile.
View product
Talk to the technical team
Tell us the application. We will specify the system.
Share the workflow, capacity, and compliance constraints. We respond with a recommended configuration, not a generic catalogue list.