Copure SPE (HLB family)
Biocomma Copure HLB: PS/DVB copolymer, pH 0–14, 500–750 m²/g, 200–400 Å, cartridges from 30 mg/1 mL to 500 mg/12 mL.
View product
Reference: GF901F / GF902F
YPD Agar
Dehydrated rich solid medium for cultivating Saccharomyces cerevisiae and Pichia pastoris.
Key specifications
- Product code
- GF901F (350 g/bottle); GF902F (700 g/bottle)
- Form
- Dehydrated powder
- Preparation
- Suspend 70.0 g in 1 L of distilled water; heat with frequent agitation and boil to dissolve; autoclave at 121 °C for 15 minutes
- pH
- Typically not adjusted; may be adjusted to 6.5 before autoclaving if required
- Configured to your application by our specialists
- Installed and commissioned on site
- Training and after-sales support across Jordan, the GCC and MENA
YPD Agar
Request a quoteOverview
Product overview
YPD Agar is a rich, agar-solidified medium for the cultivation of Saccharomyces cerevisiae and Pichia pastoris. Peptone and yeast extract provide essential nitrogen sources, vitamins and growth factors, and D-glucose serves as the carbon source.
Suspend 70.0 g in 1 L of distilled water, boil to dissolve and autoclave at 121 °C for 15 minutes. Yeast tolerates a wide pH range, so the pH is typically not adjusted, although it may be set to 6.5 before autoclaving if required.
Specifications
Technical specifications
9 parameters
General
- Product code
- GF901F (350 g/bottle); GF902F (700 g/bottle)
- Form
- Dehydrated powder
- Preparation
- Suspend 70.0 g in 1 L of distilled water; heat with frequent agitation and boil to dissolve; autoclave at 121 °C for 15 minutes
- pH
- Typically not adjusted; may be adjusted to 6.5 before autoclaving if required
- Shelf life
- 3 years
Composition
- Yeast Extract
- 10 g/L
- Peptone
- 20 g/L
- Dextrose (D-Glucose)
- 20 g/L
- Agar
- 20 g/L
Features
Key features
- 01
Yeast cultivation
For Saccharomyces cerevisiae and Pichia pastoris.
- 02
Defined nutrients
Yeast extract 10, peptone 20, dextrose 20 and agar 20 g/L.
- 03
Simple preparation
70.0 g per litre of distilled water, autoclaved at 121 °C for 15 minutes.
- 04
Two pack sizes
350 g or 700 g bottle; 3-year shelf life.
From order to operation
We stay with the instrument after it arrives
Al-Shaker specifies the configuration, documents the system, and supports it across Jordan, the GCC, and MENA.
- 01
Consult
- 02
Plan
- 03
Supply
- 04
Install
- 05
Train
- 06
Support
Keep exploring
More from Biocomma
Copure QuEChERS
Biocomma Copure QuEChERS: EN 15662, AOAC 2007, and Original salts in 50 mL tubes — AOAC 6 g MgSO4 + 1.5 g NaOAc; EN 4 g MgSO4 + 1 g NaCl + citrates.
View product
CommaSil HPLC columns
Biocomma CommaSil fully porous silica HPLC: 3 / 3.5 / 5 μm particles, 2.1 / 3.0 / 4.6 mm IDs, lengths 30–250 mm.
View product
Syringe filters
Biocomma syringe filters: nylon, PTFE, PVDF, and PES membranes in a polypropylene housing, 0.22 μm versus 0.45 μm, optional gamma-sterile.
View product
Talk to the technical team
Tell us the application. We will specify the system.
Share the workflow, capacity, and compliance constraints. We respond with a recommended configuration, not a generic catalogue list.