Cole-Parmer SHP-200D-C Stuart Digital Stirring Hot Plate
Compact digital stirring hot plate with a 15 x 15 cm glass-ceramic top, heating to 450 °C and stirring 100 to 2000 rpm for volumes up to 15 L.
View product
Reference: MP-200D
Cole-Parmer MP-200D Stuart Digital Melting Point Apparatus
Two-sample digital melting point apparatus up to 300 °C with 1 °C resolution, illuminated magnifier and programmable plateau temperature.
Key specifications
- Number of Samples
- 2
- Min Temperature
- Ambient
- Max Temperature
- 300 °C
- Temperature Accuracy
- ±1.0°C at 20°C; ±2.5°C at 300°C
- Configured to your application by our specialists
- Installed and commissioned on site
- Training and after-sales support across Jordan, the GCC and MENA
Cole-Parmer MP-200D Stuart Digital Melting Point Apparatus
Request a quoteOverview
Product overview
The MP-200D, formerly the Stuart SMP10, is a digital melting point apparatus for routine identification and purity checks of solid samples. Temperature is selected, measured and displayed digitally, so no glass thermometer is needed, and two capillaries can be tested at the same time.
The melt is observed through a magnifying lens with built-in illumination, and the rear feet can be extended to improve the viewing angle. Users set a plateau temperature for unattended rapid warm-up, after which the block heats slowly at 2 °C per minute towards the melting point for better accuracy.
The instrument reaches 300 °C with 1 °C resolution, using a Pt100 sensor and a 3-digit LED display. Stated accuracy is ±1.0 °C at 20 °C and ±2.5 °C at 300 °C.
Specifications
Technical specifications
15 parameters
- Number of Samples
- 2
- Min Temperature
- Ambient
- Max Temperature
- 300 °C
- Temperature Accuracy
- ±1.0°C at 20°C; ±2.5°C at 300°C
- Temperature Resolution
- 1°C
- Heat-Up Time
- 20°C per minute; 2°C per minute to melt
- Temperature Sensor
- 100Ω Pt RTD
- Display
- 3-digit LED
- Height
- 17 cm
- Depth
- 22 cm
- Width
- 16 cm
- Supply voltage
- 240 V AC
- Frequency
- 50 Hz
- Power consumption
- 75 W
- Warranty
- 3 years
Features
Key features
- 01
Digital temperature control
No mercury or glass thermometer required.
- 02
Two samples at once
Test duplicate capillaries simultaneously.
- 03
Illuminated magnifier
Clear view of the melt; adjustable viewing angle.
- 04
Plateau warm-up
Unattended fast heating to a preset temperature.
- 05
2 °C/min ramp
Slow final approach to the melt for accuracy.
- 06
Up to 300 °C
1 °C resolution with a Pt100 sensor.
From order to operation
We stay with the instrument after it arrives
Al-Shaker specifies the configuration, documents the system, and supports it across Jordan, the GCC, and MENA.
- 01
Consult
- 02
Plan
- 03
Supply
- 04
Install
- 05
Train
- 06
Support
Keep exploring
More from Cole-Parmer
Cole-Parmer ST-200-C Stuart Analog Magnetic Stirrer
Analog magnetic stirrer from the Stuart Undergrad range with a 15 x 15 cm glass-ceramic top, 100 to 2000 rpm and a mixing capacity of up to 15 L.
View product
Cole-Parmer HP-200-C Stuart Analog Hot Plate
Analog hot plate with a 15 x 15 cm ceramic top reaching 450 °C, dual-thermocouple control and an LED ring that indicates the surface temperature.
View product
Cole-Parmer BH-200D-2 Digital Dry Block Heater
Digital dry block heater for two single-width blocks or one double-width block, controlling up to 130 °C with ±0.1 °C uniformity at 37 °C.
View product
Talk to the technical team
Tell us the application. We will specify the system.
Share the workflow, capacity, and compliance constraints. We respond with a recommended configuration, not a generic catalogue list.