
Eco Smart Walk-in Stability Chamber
Room-sized, energy-saving walk-in stability chamber from Kesar for large-batch ICH studies. Works on dew point control with 20-60 °C and 40-95 %RH.
View product
Two-compartment chamber from Kesar combining a 2-8 °C upper section with a -20 °C or -40 °C lower section for simultaneous multi-condition testing in one unit.
Key specifications
Dual Chamber
Request a quoteOverview
The Kesar dual chamber houses two independently controlled compartments in one cabinet, so samples can be held under two different conditions at once, for example 2-8 °C above and -20 °C or -40 °C below. This saves floor space and reduces operating cost compared with running two separate units.
Built on CNC-fabricated stainless steel or powder-coated steel with a stainless steel interior, insulated doors with a magnetic gasket and a transparent inner glass door, it also uses hermetic CFC-free compressors and heavy castor wheels. The maker states the chambers meet ICH Q1A stability guidelines.
Dual digital displays (HMI and PID) allow independent monitoring of each compartment, with alarms for deviation, door opening and power failure and USB and Ethernet data logging. The page notes that the dual concept is also available in stability chamber and BOD incubator versions.
Specifications
8 parameters
Separate temperature (and humidity for stability versions) control for each section.
Two test conditions in one footprint.
Air-tight seal with a transparent inner glass door for viewing.
HMI and PID displays for each compartment.
Alerts for deviation, door opening and power failure; USB and Ethernet data logging.
Hermetic compressors with CFC-free refrigerant; heavy castor wheels for mobility.
Al-Shaker specifies the configuration, documents the system, and supports it across Jordan, the GCC, and MENA.
Consult
Plan
Supply
Install
Train
Support
Talk to the technical team
Share the workflow, capacity, and compliance constraints. We respond with a recommended configuration, not a generic catalogue list.