Phoenix 6.0BT
DOT/NHTSA evidential workplace breath tester: 1" platinum fuel cell, 0–.600 BAC, OLED, 250-test memory, and Bluetooth print — Lifeloc’s 49 CFR Part 40 confirmation EBT.
View product
Reference: FC10
FC10 Breathalyzer
Rugged, affordable portable breath alcohol tester combining direct BAC testing and passive screening, widely used by law enforcement and corrections.
Key specifications
- Alcohol sensor
- 1 in alcohol-specific platinum fuel cell
- Detection range
- 0 to .600 BAC
- Accuracy
- +/- .005 BAC to .100 BAC; +/- 5% above .100 to .400 BAC
- Response time
- Immediate on negatives; under 10 seconds on positives
- Configured to your application by our specialists
- Installed and commissioned on site
- Training and after-sales support across Jordan, the GCC and MENA
FC10 Breathalyzer
Request a quoteOverview
Product overview
The FC10 is the entry model of Lifeloc's FC Series portable breath testers. It combines direct BAC testing with passive alcohol screening, so it can be used with a mouthpiece for a measured result or without one for rapid zero-tolerance screening and open-container checks.
A 64-character backlit display shows text prompts rather than status codes, and audible and graphical cues signal insufficient breath, reverse flow and possible uncooperative subjects. Advanced lock-out features prevent unauthorised use, and the housing is built for field conditions.
The FC10 is NHTSA-approved as an evidential instrument, CE marked and made in the USA, and can be upgraded to the FC10Plus or FC20. It is not approved for DOT workplace confirmation testing under 49CFR Part 40.
Specifications
Technical specifications
11 parameters
Specifications
- Alcohol sensor
- 1 in alcohol-specific platinum fuel cell
- Detection range
- 0 to .600 BAC
- Accuracy
- +/- .005 BAC to .100 BAC; +/- 5% above .100 to .400 BAC
- Response time
- Immediate on negatives; under 10 seconds on positives
- Recovery time
- Immediate on negatives; under 30 seconds on positives
- Units of measure
- BAC standard; other common units available
- Display
- 1.65 x .87 in (42 x 22 mm) graphic LCD with automatic backlight
- Operating temperature
- 32 to 130 F (0 to 55 C)
- Power
- Four AA alkaline or NiMH batteries; up to 6,000 tests per set
- Size
- 2.6 x 5 x 1.25 in (66 x 127 x 33 mm)
- Weight with batteries
- 8 oz (226 g)
Features
Key features
- 01
Automatic, manual and passive sampling
Direct BAC testing plus mouthpiece-free passive screening in one instrument.
- 02
EasyTab mouthpiece
Self-aligning, ejectable design so the operator never touches the wet end.
- 03
1-inch platinum fuel cell
Alcohol specific, with fast response and recovery and long working life.
- 04
Breath flow and BAC indicators
Audible and graphical cues flag insufficient breath, reverse flow and likely BAC level.
- 05
Last test recall
View the result of the most recent test.
- 06
Automatic calibration support
Automatic calibration and record retention when used with the EASYCAL G2 station.
From order to operation
We stay with the instrument after it arrives
Al-Shaker specifies the configuration, documents the system, and supports it across Jordan, the GCC, and MENA.
- 01
Consult
- 02
Plan
- 03
Supply
- 04
Install
- 05
Train
- 06
Support
Keep exploring
More from Lifeloc
L Series LX9 / LT7
Evidential handhelds for law enforcement and corrections: .000–.600 BAC, 10,000-test memory, 2.2" TFT, 14–130 °F — not for 49 CFR Part 40 workplace confirmation.
View product
EASYCAL G2
Automatic calibration station for Lifeloc testers: cal under 2 minutes, cal-check under 30 seconds, 34/60/105/116 L cylinders, 0.040/0.080/0.100 gas, ~10,000 records.
View product
SENTINEL
Entry-point breath alcohol screening: passive, no mouthpieces, 1" fuel cell, negatives under 2 seconds, IP54, 13 × 8 × 4.3 in, 4.75 lb, 32–130 °F.
View product
Talk to the technical team
Tell us the application. We will specify the system.
Share the workflow, capacity, and compliance constraints. We respond with a recommended configuration, not a generic catalogue list.