Snijders Labs Climate Chambers
Day/night plant-growth and insect-breeding cabinets with accurate temperature, humidity, and illumination — from ECL02 to modular MD and high-spec MC rooms.
View product
Reference: EB2
(Cooled) Incubator Wall EB2
(Cooled) laboratory incubator wall EB2 with stainless steel interior, tangential fan and temperature range up to +60 °C, for microbiological, food, water and medical work.
Key specifications
- Net volume
- 231 L
- Gross volume
- 269 L
- Platforms standard / max.
- 2/10
- Platform dimensions (w x d)
- 625 x 580 mm
- Configured to your application by our specialists
- Installed and commissioned on site
- Training and after-sales support across Jordan, the GCC and MENA
(Cooled) Incubator Wall EB2
Request a quoteOverview
Product overview
The EB2 is part of the Snijders Labs (cooled) incubator and wall range, built for general microbiological, food, water and medical research as well as tenability tests and long-term storage. The interior is stainless steel (DIN 1.4301) with height-adjustable platforms, a lockable entry port and a water drain fitted as standard.
Temperature range is +4 to +60 (-N) / -10 to +60 (-D) °C with a fluctuation of 0,2 °C or less at one spot. A tangential fan in the return air keeps temperature uniform, and Snijders' anti-condensation system is intended to avoid cold spots and desiccation of media. The controller offers eight programmable temperature setpoints linked to eight time units, with alarms and backup safety thermostats.
Models can be installed side by side to form an incubator wall, and all incubators can be delivered with or without cooling. Each unit is tested for at least two weeks before shipping.
Specifications
Technical specifications
15 parameters
Capacity
- Net volume
- 231 L
- Gross volume
- 269 L
- Platforms standard / max.
- 2/10
- Platform dimensions (w x d)
- 625 x 580 mm
Dimensions
- External dimensions (w x d x h)
- 820 x 855 x 1960 mm
- Internal dimensions (w x d x h)
- 635 x 600 x 605 mm
Climate
- Temperature range (DIN 12880)
- +4 to +60 (-N) / -10 to +60 (-D) °C
- Temperature fluctuation (one spot)
- ≤ 0,2 °C
- Temperature variation (in chamber)
- ≤ 0,5 °C
- Airflow
- 0,2 m/s
Controller
- Controller
- Electronic PID with digital timer; PT100 sensor
General
- Insulation
- Polyurethane
- Material internal / external
- Stainless steel / coated steel
- Power supply
- 220-240 V; 50 Hz
- Net weight
- 237 kg
Features
Key features
- 01
Wall-ready design
All models can be installed side by side to form an incubator wall.
- 02
Programmable controller
Eight temperature setpoints with eight time units; alarm if the band of +/-5 °C from setpoint is exceeded.
- 03
Anti-condensation system
Removes cold spots in the working area to avoid desiccation of media.
- 04
Stainless steel interior
Easy-to-clean DIN 1.4301 stainless steel with height-adjustable platforms.
From order to operation
We stay with the instrument after it arrives
Al-Shaker specifies the configuration, documents the system, and supports it across Jordan, the GCC, and MENA.
- 01
Consult
- 02
Plan
- 03
Supply
- 04
Install
- 05
Train
- 06
Support
Keep exploring
More from Snijders Labs
Snijders Labs ULT Freezers
Dutch-built Evosafe Ecologic upright and chest freezers at −86 °C (VF120–VF1000, HF400–HF700) and −45 °C LT, with about 30% lower energy use and internet connectivity.
View product
Snijders Labs Cooled Incubators
Micro Clima BR1/BR2 and EB1/EB2 cooled incubators and incubator walls — quiet, practical cabinets tested at least two weeks in Tilburg before they ship.
View product
Snijders Labs Walk-in Climate Rooms
Bespoke walk-in plant-growth and vertical-farming rooms — homogeneous climate, full-surface cultivation beds, designed and built in-house in the Netherlands.
View product
Talk to the technical team
Tell us the application. We will specify the system.
Share the workflow, capacity, and compliance constraints. We respond with a recommended configuration, not a generic catalogue list.