Sympatec Laser Diffraction Systems
HELOS laboratory and MYTOS process laser diffraction for powders, granules, suspensions, emulsions, and sprays from below 0.1 µm to 8,750 µm.
View product
Reference: FIBROS
FIBROS fibre disperser
Pre-disperser that gently separates and doses dry, curled and entangled fibres for automatic length, diameter and straightness analysis with QICPIC.
Key specifications
- Fibre length
- 500 - 30,000 µm
- Fibre diameter
- 5 - 5,000 µm
- Sample amount (QICPIC + FIBROS)
- 0.5 - 20 g
- Versions
- Stand-alone (shortened GRADIS shaft) or add-on to GRADIS
- Configured to your application by our specialists
- Installed and commissioned on site
- Training and after-sales support across Jordan, the GCC and MENA
FIBROS fibre disperser
Request a quoteOverview
Product overview
FIBROS is a dry disperser designed to separate even heavily entangled fibre collectives so that fibre length, diameter and straightness can be measured automatically with QICPIC, without manual separation of single fibres. It applies the carding principle known from cotton spinning, using a rotating nozzle and brush with a static card and sieve.
Fibres of 500 to 30,000 µm length and 5 to 5,000 µm diameter are dispersed within minutes and carried through the GRADIS fall shaft to the measuring zone by an airstream. Different brush, card and sieve combinations adapt it to the application, and dispersion parameters are set and monitored by software or on the control panel.
Specifications
Technical specifications
5 parameters
Range
- Fibre length
- 500 - 30,000 µm
- Fibre diameter
- 5 - 5,000 µm
- Sample amount (QICPIC + FIBROS)
- 0.5 - 20 g
Design
- Versions
- Stand-alone (shortened GRADIS shaft) or add-on to GRADIS
Compatibility
- Sensor
- QICPIC
Features
Key features
- 01
Entangled fibres
Gentle separation of curled collectives.
- 02
Adaptable
Interchangeable brushes, cards and sieves.
- 03
Two set-ups
Stand-alone or add-on platform for GRADIS.
- 04
Easy cleaning
Open dispersing chamber and fall shaft.
From order to operation
We stay with the instrument after it arrives
Al-Shaker specifies the configuration, documents the system, and supports it across Jordan, the GCC, and MENA.
- 01
Consult
- 02
Plan
- 03
Supply
- 04
Install
- 05
Train
- 06
Support
Keep exploring
More from Sympatec
Sympatec Dynamic Image Analysis
QICPIC laboratory and PICTOS process image analysis for particle size and shape from 1 µm to 34,000 µm.
View product
Sympatec NANOPHOX DLS
Photon cross-correlation (PCCS) for nanoparticles in turbid suspensions and emulsions from 0.5 nm to 10,000 nm, without extreme dilution.
View product
Sympatec Ultrasonic Extinction Systems
NIMBUS laboratory and OPUS process analysers for particle size and concentration in suspensions and emulsions from below 0.1 µm to 3,000 µm.
View product
Talk to the technical team
Tell us the application. We will specify the system.
Share the workflow, capacity, and compliance constraints. We respond with a recommended configuration, not a generic catalogue list.