Sympatec Laser Diffraction Systems
HELOS laboratory and MYTOS process laser diffraction for powders, granules, suspensions, emulsions, and sprays from below 0.1 µm to 8,750 µm.
View product
Reference: FLOWCELL
FLOWCELL large-volume flow cuvette
Large-volume open-loop flow cuvette for QICPIC image analysis of suspensions with coarse particles from 10 µm to over 10,000 µm.
Key specifications
- Particle size
- 10 - >10,000 (soft materials up to 16,000) µm
- Flow diameters
- 10 mm / 20 mm
- Throughput
- > 10 l/min (10 mm) / > 20 l/min (20 mm)
- Cuvette material
- Stainless steel; silicone gasket (others on request)
- Configured to your application by our specialists
- Installed and commissioned on site
- Training and after-sales support across Jordan, the GCC and MENA
FLOWCELL large-volume flow cuvette
Request a quoteOverview
Product overview
FLOWCELL is an open-loop flow cell for measuring coarse particles in liquids with QICPIC, such as pulps in juice or ion-exchange polymer beads. Flow diameters of 10 mm and 20 mm allow throughputs above 10 and 20 l/min respectively, so representative particle numbers are captured, and it is also suitable for pressure- or shear-sensitive particles and for agglomeration or polymerisation processes.
A basic unit mounts in the QICPIC measuring zone and a vertical stainless-steel cuvette is pushed into an O-ring seal and fixed by a swivelling holder. In a typical set-up the sample flows by gravity from a container above, so no power supply or control is needed. It can be used with all QICPIC sensors in ranges M8 or M9.
Specifications
Technical specifications
5 parameters
Range
- Particle size
- 10 - >10,000 (soft materials up to 16,000) µm
Design
- Flow diameters
- 10 mm / 20 mm
- Throughput
- > 10 l/min (10 mm) / > 20 l/min (20 mm)
- Cuvette material
- Stainless steel; silicone gasket (others on request)
Compatibility
- Sensor
- QICPIC with ranges M8 or M9
Features
Key features
- 01
Large volume flow
More than 10 or 20 l/min.
- 02
Two gap widths
10 mm and 20 mm cuvettes.
- 03
No power needed
Gravity-driven sample feed.
- 04
Easy cleaning
Tool-free cuvette removal.
From order to operation
We stay with the instrument after it arrives
Al-Shaker specifies the configuration, documents the system, and supports it across Jordan, the GCC, and MENA.
- 01
Consult
- 02
Plan
- 03
Supply
- 04
Install
- 05
Train
- 06
Support
Keep exploring
More from Sympatec
Sympatec Dynamic Image Analysis
QICPIC laboratory and PICTOS process image analysis for particle size and shape from 1 µm to 34,000 µm.
View product
Sympatec NANOPHOX DLS
Photon cross-correlation (PCCS) for nanoparticles in turbid suspensions and emulsions from 0.5 nm to 10,000 nm, without extreme dilution.
View product
Sympatec Ultrasonic Extinction Systems
NIMBUS laboratory and OPUS process analysers for particle size and concentration in suspensions and emulsions from below 0.1 µm to 3,000 µm.
View product
Talk to the technical team
Tell us the application. We will specify the system.
Share the workflow, capacity, and compliance constraints. We respond with a recommended configuration, not a generic catalogue list.