Sympatec Laser Diffraction Systems
HELOS laboratory and MYTOS process laser diffraction for powders, granules, suspensions, emulsions, and sprays from below 0.1 µm to 8,750 µm.
View product
Reference: LIQXI
LIQXI wet dosing unit
Wet dosing unit that feeds fine suspensions and emulsions to LIXELL and QICPIC in closed-loop or one-shot mode, optimised for micro cuvettes with gaps from 30 µm.
Key specifications
- Particle size
- 0.1 - 500 µm
- Cuvette gap widths
- 0.03 mm - 1 mm (LIXELL cuvettes)
- Beaker
- 250 ml standard glass beakers or flow-optimised beaker
- Stirrers
- ViscoJet stainless steel and axial stirrer
- Configured to your application by our specialists
- Installed and commissioned on site
- Training and after-sales support across Jordan, the GCC and MENA
LIQXI wet dosing unit
Request a quoteOverview
Product overview
LIQXI is the recommended dosing solution for the wet disperser LIXELL when finely dispersed particles up to 500 µm are measured in suspension, in closed-loop or one-shot operation. It was designed for the micro cuvettes with very small gap widths (down to 30 µm) that the lower QICPIC measuring ranges require, and is optimised for LIXELL cuvettes from 0.03 to 1 mm.
Suspensions are homogenised in a beaker with a ViscoJet stainless-steel stirrer and pumped by a speed-controlled peristaltic pump. For coarse or broad distributions a special beaker, baffle and axial stirrer act as a small flow reactor to avoid segregation. The accessory set includes two beakers, two stirrers and a draft tube, and hose and gasket sets are available for special liquids.
Specifications
Technical specifications
5 parameters
Range
- Particle size
- 0.1 - 500 µm
Design
- Cuvette gap widths
- 0.03 mm - 1 mm (LIXELL cuvettes)
- Beaker
- 250 ml standard glass beakers or flow-optimised beaker
- Stirrers
- ViscoJet stainless steel and axial stirrer
Compatibility
- Use with
- LIXELL and QICPIC
Features
Key features
- 01
Closed-loop or one-shot
Flexible operation modes.
- 02
Micro cuvettes
Gap widths from 0.03 mm.
- 03
Anti-segregation
Flow-reactor beaker for coarse samples.
- 04
Chemical options
Different hose and gasket sets.
From order to operation
We stay with the instrument after it arrives
Al-Shaker specifies the configuration, documents the system, and supports it across Jordan, the GCC, and MENA.
- 01
Consult
- 02
Plan
- 03
Supply
- 04
Install
- 05
Train
- 06
Support
Keep exploring
More from Sympatec
Sympatec Dynamic Image Analysis
QICPIC laboratory and PICTOS process image analysis for particle size and shape from 1 µm to 34,000 µm.
View product
Sympatec NANOPHOX DLS
Photon cross-correlation (PCCS) for nanoparticles in turbid suspensions and emulsions from 0.5 nm to 10,000 nm, without extreme dilution.
View product
Sympatec Ultrasonic Extinction Systems
NIMBUS laboratory and OPUS process analysers for particle size and concentration in suspensions and emulsions from below 0.1 µm to 3,000 µm.
View product
Talk to the technical team
Tell us the application. We will specify the system.
Share the workflow, capacity, and compliance constraints. We respond with a recommended configuration, not a generic catalogue list.