Sympatec Laser Diffraction Systems
HELOS laboratory and MYTOS process laser diffraction for powders, granules, suspensions, emulsions, and sprays from below 0.1 µm to 8,750 µm.
View product
Reference: MIXER
MIXER static secondary sampler
Static sampler with bar gratings that homogenises a bypass stream and extracts a representative analysis sample of a few grams for on-line MYTOS measurement.
Key specifications
- Particle size
- 0.25 - 1,750 µm
- Pipe diameter
- 60 mm
- Max. mass flow rate
- 400 kg/h
- Product temperature
- -20 to 80 °C
- Configured to your application by our specialists
- Installed and commissioned on site
- Training and after-sales support across Jordan, the GCC and MENA
MIXER static secondary sampler
Request a quoteOverview
Product overview
MIXER collects homogeneous, representative analysis samples from processes with high mass flows of dry, relatively narrowly distributed bulk solids, such as cement or anode coke grinding. In two-stage sampling, a screw or air slide sampler first branches a partial stream of typically 30 to 50 kg/h, and MIXER then reduces it to a few grams (about 2 to 5 g for cement) suitable for laser diffraction.
Product in a 60 mm pipe is randomly mixed through four offset bar gratings, and a static probe in the centre extracts the sample. Five probe-tip inlet sizes from 1.5 to 2.5 mm adjust the sample amount, a pneumatic oscillator keeps product moving and dedusts, and an integrated blow-back device keeps the system clean and allows particle-free reference measurements.
Specifications
Technical specifications
7 parameters
Application
- Particle size
- 0.25 - 1,750 µm
- Pipe diameter
- 60 mm
- Max. mass flow rate
- 400 kg/h
Process
- Product temperature
- -20 to 80 °C
- Ambient temperature
- -20 to 55 °C
Design
- Probe tip inlet openings
- Five sizes, 1.5 - 2.5 mm
- Mixing
- Four offset bar gratings with pneumatic oscillator
Features
Key features
- 01
Two-stage sampling
Secondary sampler after a screw or air slide.
- 02
Adjustable sample size
Five probe-tip inlet openings.
- 03
Self-cleaning
Pneumatic oscillator and blow-back.
- 04
Pairs with MYTOS
On-line laser diffraction.
From order to operation
We stay with the instrument after it arrives
Al-Shaker specifies the configuration, documents the system, and supports it across Jordan, the GCC, and MENA.
- 01
Consult
- 02
Plan
- 03
Supply
- 04
Install
- 05
Train
- 06
Support
Keep exploring
More from Sympatec
Sympatec Dynamic Image Analysis
QICPIC laboratory and PICTOS process image analysis for particle size and shape from 1 µm to 34,000 µm.
View product
Sympatec NANOPHOX DLS
Photon cross-correlation (PCCS) for nanoparticles in turbid suspensions and emulsions from 0.5 nm to 10,000 nm, without extreme dilution.
View product
Sympatec Ultrasonic Extinction Systems
NIMBUS laboratory and OPUS process analysers for particle size and concentration in suspensions and emulsions from below 0.1 µm to 3,000 µm.
View product
Talk to the technical team
Tell us the application. We will specify the system.
Share the workflow, capacity, and compliance constraints. We respond with a recommended configuration, not a generic catalogue list.