Sympatec Laser Diffraction Systems
HELOS laboratory and MYTOS process laser diffraction for powders, granules, suspensions, emulsions, and sprays from below 0.1 µm to 8,750 µm.
View product
Reference: OPUS-BP
OPUS-BP ultrasonic extinction sensor with bypass adapter
Process ultrasonic extinction sensor with bypass adapter for pipes DN50 to DN200, giving real-time particle size and concentration from below 0.1 to 3,000 µm.
Key specifications
- Measuring principle
- Ultrasonic extinction, 31 measuring points
- Measuring range
- < 0.1 - 3,000 µm
- Product temperature
- -20 to 120 °C
- pH range
- 1 - 14
- Configured to your application by our specialists
- Installed and commissioned on site
- Training and after-sales support across Jordan, the GCC and MENA
OPUS-BP ultrasonic extinction sensor with bypass adapter
Request a quoteOverview
Product overview
OPUS-BP integrates the OPUS probe into pipelines of DN50 to DN200 through a bypass adapter with standard flange sizes DN50, DN100, DN150 and DN200. Part of the product stream passes through the measuring zone while the rest flows around the probe, for flows up to 10,000 l/h.
It can be installed in the main product flow (in-line) or in a diverted partial flow (on-line) and measures suspensions, emulsions and slurries up to 40 vol% without dilution. The adapter is installed in a pipe section of about 300 mm length.
Specifications
Technical specifications
10 parameters
Measurement
- Measuring principle
- Ultrasonic extinction, 31 measuring points
- Measuring range
- < 0.1 - 3,000 µm
- Max. concentration
- 40 vol%
Process
- Product temperature
- -20 to 120 °C
- pH range
- 1 - 14
- Pressure level
- PN40
Interfaces
- Process control
- Modbus RTU/TCP, Profibus, OPC, TCP/IP, FTP, analogue PLC signals
Installation
- Pipe sizes
- DN50 / DN100 / DN150 / DN200
- Flow
- Up to 10,000 l/h
- Pipe section length
- Approx. 300 mm
Features
Key features
- 01
Pipe sizes DN50-DN200
Standard flange connections.
- 02
In-line or on-line
Main flow or diverted partial flow.
- 03
Rugged
-20 to 120 °C, PN40, pH 1 to 14.
- 04
Optional ATEX
Equipment for potentially explosive areas on request.
From order to operation
We stay with the instrument after it arrives
Al-Shaker specifies the configuration, documents the system, and supports it across Jordan, the GCC, and MENA.
- 01
Consult
- 02
Plan
- 03
Supply
- 04
Install
- 05
Train
- 06
Support
Keep exploring
More from Sympatec
Sympatec Dynamic Image Analysis
QICPIC laboratory and PICTOS process image analysis for particle size and shape from 1 µm to 34,000 µm.
View product
Sympatec NANOPHOX DLS
Photon cross-correlation (PCCS) for nanoparticles in turbid suspensions and emulsions from 0.5 nm to 10,000 nm, without extreme dilution.
View product
Sympatec Ultrasonic Extinction Systems
NIMBUS laboratory and OPUS process analysers for particle size and concentration in suspensions and emulsions from below 0.1 µm to 3,000 µm.
View product
Talk to the technical team
Tell us the application. We will specify the system.
Share the workflow, capacity, and compliance constraints. We respond with a recommended configuration, not a generic catalogue list.