Sympatec Laser Diffraction Systems
HELOS laboratory and MYTOS process laser diffraction for powders, granules, suspensions, emulsions, and sprays from below 0.1 µm to 8,750 µm.
View product
Reference: OPUS-FT
OPUS-FT ultrasonic extinction sensor with flow-through adapter
Process ultrasonic extinction sensor with flow-through adapter for small pipes and bypass lines DN10 to DN25, measuring particle size and concentration in real time.
Key specifications
- Measuring principle
- Ultrasonic extinction, 31 measuring points
- Measuring range
- < 0.1 - 3,000 µm
- Product temperature
- -20 to 120 °C
- pH range
- 1 - 14
- Configured to your application by our specialists
- Installed and commissioned on site
- Training and after-sales support across Jordan, the GCC and MENA
OPUS-FT ultrasonic extinction sensor with flow-through adapter
Request a quoteOverview
Product overview
OPUS-FT uses a flow-through adapter, available as FT10, FT15, FT20 and FT25, to guide the whole product flow through the measuring zone of the OPUS probe. It suits process or bypass lines with diameters of 10 to 25 mm and flows up to 2,000 l/h, such as small production scales and pilot plants.
The adapter is installed at a height of 300 mm via its standard flange. It measures suspensions, emulsions and slurries up to 40 vol% in the range below 0.1 to 3,000 µm, in-line or on-line.
Specifications
Technical specifications
10 parameters
Measurement
- Measuring principle
- Ultrasonic extinction, 31 measuring points
- Measuring range
- < 0.1 - 3,000 µm
- Max. concentration
- 40 vol%
Process
- Product temperature
- -20 to 120 °C
- pH range
- 1 - 14
- Pressure level
- PN40
Interfaces
- Process control
- Modbus RTU/TCP, Profibus, OPC, TCP/IP, FTP, analogue PLC signals
Installation
- Pipe sizes
- DN10 to DN25 (FT10 / FT15 / FT20 / FT25)
- Max. flow
- 2,000 l/h
- Installation height
- 300 mm
Features
Key features
- 01
Small pipes
DN10 to DN25 line sizes.
- 02
Full-flow guidance
Entire flow passes the measuring gap.
- 03
Rugged
-20 to 120 °C, PN40, pH 1 to 14.
- 04
Optional ATEX
Equipment for potentially explosive areas on request.
From order to operation
We stay with the instrument after it arrives
Al-Shaker specifies the configuration, documents the system, and supports it across Jordan, the GCC, and MENA.
- 01
Consult
- 02
Plan
- 03
Supply
- 04
Install
- 05
Train
- 06
Support
Keep exploring
More from Sympatec
Sympatec Dynamic Image Analysis
QICPIC laboratory and PICTOS process image analysis for particle size and shape from 1 µm to 34,000 µm.
View product
Sympatec NANOPHOX DLS
Photon cross-correlation (PCCS) for nanoparticles in turbid suspensions and emulsions from 0.5 nm to 10,000 nm, without extreme dilution.
View product
Sympatec Ultrasonic Extinction Systems
NIMBUS laboratory and OPUS process analysers for particle size and concentration in suspensions and emulsions from below 0.1 µm to 3,000 µm.
View product
Talk to the technical team
Tell us the application. We will specify the system.
Share the workflow, capacity, and compliance constraints. We respond with a recommended configuration, not a generic catalogue list.