Sympatec Laser Diffraction Systems
HELOS laboratory and MYTOS process laser diffraction for powders, granules, suspensions, emulsions, and sprays from below 0.1 µm to 8,750 µm.
View product
Reference: L-probes / pivoting probe
Static L-probes and pneumatic pivoting probe
Compact single-point sampling probes for dry powders in pipes of 65 to 250 mm, with a GMP pneumatic pivoting probe alternative for 150 to 200 mm.
Key specifications
- Particle size
- 0.25 - 3,500 µm
- Pipe diameter (static probe)
- 65 - 250 mm
- Pipe diameter (pivoting probe, GMP)
- 150 - 200 mm
- Mass flow rate
- 1 kg/h - 3 t/h
- Configured to your application by our specialists
- Installed and commissioned on site
- Training and after-sales support across Jordan, the GCC and MENA
Static L-probes and pneumatic pivoting probe
Request a quoteOverview
Product overview
Single-point sampling probes suit dry, disperse products with a narrow grain-size range that flow evenly through the pipe. With an installation height of only 150 mm, they are welded in via a stud with clamping flange and feed the on-line MYTOS or PICTOS with RODOS dry dispersion.
The static L-shaped probe works in pipes from 65 to 250 mm; tip immersion depth and tilt angle are adjustable and lockable, with 6 mm or 10 mm conveyor lines and a choice of line coatings. For GMP pharmaceutical applications where blow-back into the process is not permitted, a pneumatic pivoting probe for pipes of 150 to 200 mm rotates its opening out of the product stream during reference measurements and idle phases.
Specifications
Technical specifications
7 parameters
Application
- Particle size
- 0.25 - 3,500 µm
- Pipe diameter (static probe)
- 65 - 250 mm
- Pipe diameter (pivoting probe, GMP)
- 150 - 200 mm
- Mass flow rate
- 1 kg/h - 3 t/h
Process
- Product temperature
- -20 to 150 °C static; -20 to 100 °C pivoting
Design
- Installation height
- 150 mm
- Conveyor line diameters
- 6 mm and 10 mm
Features
Key features
- 01
Compact
150 mm installation height.
- 02
Adjustable tip
Depth and tilt lockable.
- 03
GMP option
Pneumatic pivoting probe, no blow-back into process.
- 04
Line options
6 mm and 10 mm conveyor lines.
From order to operation
We stay with the instrument after it arrives
Al-Shaker specifies the configuration, documents the system, and supports it across Jordan, the GCC, and MENA.
- 01
Consult
- 02
Plan
- 03
Supply
- 04
Install
- 05
Train
- 06
Support
Keep exploring
More from Sympatec
Sympatec Dynamic Image Analysis
QICPIC laboratory and PICTOS process image analysis for particle size and shape from 1 µm to 34,000 µm.
View product
Sympatec NANOPHOX DLS
Photon cross-correlation (PCCS) for nanoparticles in turbid suspensions and emulsions from 0.5 nm to 10,000 nm, without extreme dilution.
View product
Sympatec Ultrasonic Extinction Systems
NIMBUS laboratory and OPUS process analysers for particle size and concentration in suspensions and emulsions from below 0.1 µm to 3,000 µm.
View product
Talk to the technical team
Tell us the application. We will specify the system.
Share the workflow, capacity, and compliance constraints. We respond with a recommended configuration, not a generic catalogue list.