Sympatec Laser Diffraction Systems
HELOS laboratory and MYTOS process laser diffraction for powders, granules, suspensions, emulsions, and sprays from below 0.1 µm to 8,750 µm.
View product
Reference: SCREWSAMPLER
SCREWSAMPLER compact screw sampler
Compact screw sampler for cohesive and adhesive powders in downpipes that collects a representative cross-section and feeds MYTOS or PICTOS.
Key specifications
- Particle size
- 0.25 - 1,750 µm
- Mass flow rate
- 1 - 1,000 kg/h
- Installation height
- 30 mm
- Connection
- DN25 weld-on stud with clamp
- Configured to your application by our specialists
- Installed and commissioned on site
- Training and after-sales support across Jordan, the GCC and MENA
SCREWSAMPLER compact screw sampler
Request a quoteOverview
Product overview
SCREWSAMPLER is suited to dry, powdery products with restricted flowability due to adhesive or cohesive properties, where a representative sample from the usually inhomogeneous downpipe flow requires a cross-section of the process line.
With an installation height of only 30 mm, it is integrated in the downpipe through a DN25 weld-on stud and clamp connection. The screw immersion depth is adjusted from 200 to 300 mm to suit the line cross-section, and openings in the collection tube give a representative cross-section. Screw speed and run time are software-controlled according to the optical concentration set for the sensor, and the sample is conveyed in a tube by the vacuum of the integrated RODOS dispersion in MYTOS. It covers particles from 0.25 to 1,750 µm at 1 to 1,000 kg/h.
Specifications
Technical specifications
6 parameters
Application
- Particle size
- 0.25 - 1,750 µm
- Mass flow rate
- 1 - 1,000 kg/h
- Products
- Cohesive and adhesive powders and granules
Design
- Installation height
- 30 mm
- Connection
- DN25 weld-on stud with clamp
- Immersion depth
- 200 - 300 mm
Features
Key features
- 01
Cohesive products
Designed for adhesive and cohesive powders.
- 02
Compact
30 mm installation height.
- 03
Software-controlled
Speed and run time follow optical concentration.
- 04
Cross-section sample
200 to 300 mm adjustable immersion.
From order to operation
We stay with the instrument after it arrives
Al-Shaker specifies the configuration, documents the system, and supports it across Jordan, the GCC, and MENA.
- 01
Consult
- 02
Plan
- 03
Supply
- 04
Install
- 05
Train
- 06
Support
Keep exploring
More from Sympatec
Sympatec Dynamic Image Analysis
QICPIC laboratory and PICTOS process image analysis for particle size and shape from 1 µm to 34,000 µm.
View product
Sympatec NANOPHOX DLS
Photon cross-correlation (PCCS) for nanoparticles in turbid suspensions and emulsions from 0.5 nm to 10,000 nm, without extreme dilution.
View product
Sympatec Ultrasonic Extinction Systems
NIMBUS laboratory and OPUS process analysers for particle size and concentration in suspensions and emulsions from below 0.1 µm to 3,000 µm.
View product
Talk to the technical team
Tell us the application. We will specify the system.
Share the workflow, capacity, and compliance constraints. We respond with a recommended configuration, not a generic catalogue list.