
PreCiGen Hydrogen Gas Generator
PCI PreCiGen PEM hydrogen for GC-FID: up to 99.9999% purity from deionized water, on demand, with automatic shutdown — no high-pressure cylinders.
View product
Equipment guide
A laboratory gas generator produces hydrogen, nitrogen or zero air on demand from electricity and air or water, replacing cylinder deliveries. Size it from the total flow of the instruments it feeds, add margin, and confirm the purity your detector requires.

PCI PreCiGen PEM hydrogen for GC-FID: up to 99.9999% purity from deionized water, on demand, with automatic shutdown — no high-pressure cylinders.
View product

One PreCiGen chassis for ultra-high-purity nitrogen, zero air, and hydrogen — built for GC-FID, cylinder-free, modular and space-saving.
View product

PCI re Vap / EV-PLUS nitrogen blowdown: 15 s–10 h timer, ambient–90 °C, 50 positions (also 30/100/144), N2 60–100 PSI, 6.5 L bath, 600 × 520 × 400 mm, 25 kg.
View product

Membrane-based nitrogen generator for LC-MS instruments that strips oxygen and moisture from compressed air to give a steady, phthalate-free nitrogen supply.
View product

Plug-and-play membrane nitrogen generator for LC-MS with a built-in silent oil-free compressor, an air storage tank and an HMI.
View product

Microprocessor-controlled PreCiGen generator series for continuous ultra-high-purity gas, with real-time monitoring of flow and pressure.
View product

PSA nitrogen generator for gas chromatography that uses a carbon molecular sieve to remove trace oxygen and moisture for stable baselines and longer column life.
View product

Compact plug-and-play nitrogen generator with an inbuilt oil-free compressor, 99.99% purity and 8-10 bar pressure for GC, GC-MS, LC-MS/MS, CAD and ELSD.
View product

High-flow PreCiGen nitrogen generator for LC-MS and LC-MS/MS, supplying curtain, source and exhaust gas as pure, phthalate-free nitrogen.
View product

Dedicated PreCiGen nitrogen generator that supplies the continuous clean, dry nitrogen flow needed by nitrogen concentrators and turbo evaporators.
View product

Two-in-one PSA generator that supplies ultra-high-purity nitrogen carrier gas and hydrocarbon-free zero air for FID from one compact unit and one compressor.
View product

PSA generator giving GC-grade nitrogen plus zero air for GC and zero air for TOC analyzers, from one cabinet at 500 to 4000 ml/min at 5 kg/cm2.
View product
Hydrogen for FID and carrier, nitrogen for makeup and evaporation, zero air for FID. Check the purity level your method requires.
Add up the flow of every instrument on the line and keep headroom. A single GC-FID typically needs tens of mL/min of hydrogen and a few hundred mL/min of air.
Low-volume hydrogen generators store minimal gas, which is inherently safer than a hydrogen cylinder. Add leak detection for the room.
Regulators, manifolds, changeover panels and stainless lines keep pressure stable and prevent contamination.
Compare generator running cost (power, water, consumables) against cylinder rental, delivery and handling over several years.
Each range is supplied with installation, operator training and local service.
Generally yes. A generator holds only a small volume of hydrogen at low pressure and shuts off on a leak, while a cylinder stores a large volume at high pressure. Good ventilation and leak detection are still required.
Often, yes, with method re-validation. Hydrogen gives faster separations at lower cost, and on-site generation removes helium supply risk.
Yes. Gas generators, purification, regulators, changeover panels and distribution are supplied, installed and supported as part of the laboratory package.
Talk to the technical team
Share the workflow, capacity, and compliance constraints. We respond with a recommended configuration, not a generic catalogue list.