Sympatec
Sympatec Laser Diffraction Systems
HELOS laboratory and MYTOS process laser diffraction for powders, granules, suspensions, emulsions, and sprays from below 0.1 µm to 8,750 µm.
View product
Equipment guide
Particle size and shape analyzers in Jordan
Particle size analysers measure the size distribution (and sometimes shape) of powders, suspensions and sprays. Laser diffraction covers roughly sub-micron to millimetre sizes quickly; image analysis adds shape. Choose by size range, whether the sample is dry or wet, and the standards you follow.
In our catalog
Particle size analyzers
41 products from Sympatec
Sympatec
Sympatec Dynamic Image Analysis
QICPIC laboratory and PICTOS process image analysis for particle size and shape from 1 µm to 34,000 µm.
View product
Sympatec
Sympatec NANOPHOX DLS
Photon cross-correlation (PCCS) for nanoparticles in turbid suspensions and emulsions from 0.5 nm to 10,000 nm, without extreme dilution.
View product
Sympatec
Sympatec Ultrasonic Extinction Systems
NIMBUS laboratory and OPUS process analysers for particle size and concentration in suspensions and emulsions from below 0.1 µm to 3,000 µm.
View product
Sympatec
Sympatec Dry Dispersion Units
RODOS compressed-air free jet, GRADIS gravitational dispersing, and FIBROS fibre feed — the original dry-dispersion family from the inventor of the method.
View product
Sympatec
Sympatec Wet Dispersing Systems
SUCELL, QUIXEL, CUVETTE, LIXELL, FLOWCELL, and OASIS wet (and dry-and-wet) dispersing for HELOS and QICPIC.
View product
Sympatec
Sympatec PAQXOS Software
Control and evaluation software for all Sympatec instruments, with ISO method support and FDA 21 CFR Part 11 for regulated laboratories.
View product
Sympatec
HELOS/BR laser diffraction particle size analyser
Compact laboratory laser diffraction sensor from the HELOS family measuring 0.1 to 875 µm, usable with all HELOS dispersing and dosing units.
View product
Sympatec
HELOS/KR laser diffraction particle size analyser
Long-bench HELOS laser diffraction sensor covering 0.1 to 8,750 µm for fine to very coarse powders, granules, suspensions and emulsions.
View product
Sympatec
HELOS/KR-Vario laser diffraction sensor
Most flexible HELOS sensor with a variable open measuring zone from 123 to 1,400 mm for technical sprays, pilot plants and wind-tunnel set-ups.
View product
Sympatec
MYTOS process laser diffraction sensor
Robust laser diffraction sensor with integrated dry dispersion for in-line, on-line and at-line particle size analysis of dry powders from 0.25 to 3,500 µm.
View product
Sympatec
PICTOS, PICTIS and PICCELL process image analysers
Process dynamic image analysers for dry powders, granules, suspensions and emulsions from 1 to 10,000 µm, installed on-line, at-line or off-line.
View product
How to choose: Particle size analyzers
- 01
Technique
Laser diffraction (ISO 13320) for fast distributions, dynamic image analysis for size and shape, dynamic light scattering for nanoparticles.
- 02
Size range
Match the instrument's range to your smallest and largest particles; many samples need a wide range to avoid truncating the distribution.
- 03
Dispersion
Dry dispersion suits free-flowing powders and avoids solvents; wet dispersion suits suspensions and fine or sticky powders.
- 04
Sample size and automation
Micro-dosing and automatic sample feeders improve repeatability and throughput in routine QC.
- 05
Method transfer
Choose a platform with validated, documented methods so results correlate between laboratory and process.
Typical applications
- Pharmaceutical powders, inhalation and API milling
- Cement, minerals and construction materials
- Food, dairy and cosmetics
- Battery, catalyst and ceramic powders
- Process control and spray characterisation
Manufacturers we supply for this equipment
Each range is supplied with installation, operator training and local service.
Frequently asked questions
What is laser diffraction particle size analysis?
A laser passes through a dispersed sample and detectors record the scattering pattern, which software converts into a particle-size distribution. It is fast, repeatable and standardised in ISO 13320.
Dry or wet dispersion: which should I choose?
Use dry dispersion for free-flowing powders when solvents must be avoided, and wet dispersion for suspensions, very fine powders or samples that need de-agglomeration with ultrasound.
Does Al-Shaker support Sympatec in Jordan?
Yes. Al-Shaker supplies Sympatec analysers with installation, operator training and technical support across Jordan and MENA.
Talk to the technical team
Tell us the application. We will specify the system.
Share the workflow, capacity, and compliance constraints. We respond with a recommended configuration, not a generic catalogue list.